QuixSep

Quick Sep



 

The QuixSep Micro Dialyzers are designed for the rapid and efficient dialysis os small volumes

 ranging from 0.1 ml - 1.0 ml

The QuixSep method of loading and unloading sample is easy, efficient, and helps prevent

sample loss.

 QuixSep is available in 3 volumes: 0.1 ml, 0.5 ml and 1.0 ml

For larger volumes use QuickSep 5 ml Dialyzers and QuickSep Micro Dialyzers

Features:







ECONOMICAL: each dialyzer can be re-used 100 times, keeping your cost per procedure







lower than any other device in the market. You may choose any dyalisis membrane (and







MWCO) "right off the shelf" to use with a QuickSep. Specifically, you may use our pre-cut,








low cost, CelluSep F- Series Membranes Squares

VERSATILE: You are not limited to a specific MWCO, as with competitive dialyzers

You can use any membrane that is at least 55 mm wide, and in any MWCO available.

Membranes can even be cut from a roll of membrane tubing that you may already have on

hand, as long as the membrane, when open, is at least 55 mm wide. Or we can supply you

with Cellu Sep F-series pre-cut membrane squares in 3 MWCO´s
 

ENVIRONMENTALLY FRIENDLY - No disposable cassettes or cartridges to add to

your ever-expanding biohazardous waste

FAST - 15cm² membrane surface ensures a fast, complete dialysis procedure

Each flat sheet measures 55 mm x 55 mm, with 10 sheets to a box. This amount






provides 10 dialysis procedures for the Quick Sep 5 ml Dialyzer.

Method of use:

1. Fill base with sample.

2. Place prepared membrane over base and push the collar over
   

    base to seal.

3. Dialyze in vigorously stirred beaker, making sure that the
   

    QuixSep is pulled below the surface, and rotates vertically in the
   

    vortex.

4. Pierce membrane with pipette tip or syringe to aspirate
  

    sample.